2 Inch Flange Solenoid Valve
2 Inch Cast Iron Liquid Solenoid Valve
Technicial Detail
| ●Part Number:DF-50F | ●Coil Type: IP65 DIN Connector |
| ●Mode of Operation:Normally Closed | ●Voltage:AC220V,AC110V,DC24V,DC12V |
| ●Pipe Size:DN50 Flange | ●Response Time: Less than 1 second |
| ●Body Material:Cast Iron | ●Duty Cycle: 100% but not indefinitely |
| ●Coil Material:Copper | ●Suitable Media: Water, Air, Oil, Gas |
| ●Seal Material: NBR or VITON | ●Weight:9.5kg |
| ●Orifice:50mm | ●Length:200mm |
| ●Temperature Range:-5-150°C | ●Width:125mm |
| ●Pressure Range: 0.3-12Bar | ●Height:200mm |
DF-50F Cast Iron Flange Solenoid Valve works great with water, air and fluid. Operates normally closed and has a solid cast iron body. This valve is big flow and works very well with a variety of applications. Irrigation, Fountains, Water Filtration, Solar Heating, Aquariums, Automotive, Beer Brewing, Hydroponics, HVAC, and Plumbing and everywhere else one of our valves can be applied
It's two way two position pilot operated diaphragm electric water solenoid valve uses NBR or VITON diaphragm material that is compatible with many liquid such as water up to 150°C. The valve is normally closed, closed when de-energized and open when energized. It is capable of operating at 0.3 bar differential pressure. This solenoid valve can fit with international flange DN50.
DF-50F Cast Iron Flange Solenoid Valve has four coil with voltage AC220V, AV110V, DC24V and DC12V. The coil head is fitted with a DIN connection that can easily be connected with your own choice of terminals. This model is mountable in any position and features a conveniently positioned arrow on the body to indicate the direction of flow. Its response time is very low; in fact, it acts in less than one second, making it a great choice for all types of applications.
Non-applicable fluid
When the temperature is high, it is liquid, and solid when cooled; Corrsive Fluid; Fluid above 20 cst concentration.
Attention
The impurities in the line must be cleaned first before installation. In order to prolong service life, Y filter should be installed on the front end of solenoid valve.
| Solenoid Valve Size Chart(mm) | |||||||
| Valve NO. | DN | CV | A | B | C | N-φF | Weight(kg) |
| DF-40F | 40 | 30 | 155 | 110 | 205 | 4-φ18 | 6.5 |
| DF-50F | 50 | 48 | 200 | 125 | 200 | 4-φ18 |
9.5 |
| DF-65F | 65 | 52 | 259 | 145 | 277 | 4-φ18 | 9.5 |
| DF-80F | 80 | 82 | 278 | 160 | 289 | 8-φ18 | 18.1 |
| DF-100F | 100 | 125 | 350 | 180 | 316 | 8-φ18 | 25.4 |
| DF-125F | 125 | 222 | 400 | 210 | 380 | 8-φ18 | 45.7 |
| DF-150F | 150 | 292 | 450 | 240 | 405 | 8-φ22 | 55.2 |
| DF-200F | 200 | 513 | 560 | 340 | 516 | 12-φ22 | 112 |
- Next Product:2.5 Inch Flange Solenoid Valve
