5 Inch Flange Solenoid Valve

5 Inch Flange Solenoid Valve

DN 125 220V Normally Closed 5 Inch Diapgragm Cast Iron Flange Solenoid Valve

  • Product No.: DF-125F
  • Price: 210USD
  • Pressure: 0.3-12Bar
  • Pipe Size: 5 Inch
  • Medium temperature: -5-80℃
  • Mode of action: Pilot Operated
  • Medium: Water,Fluid


5 Inch Cast Iron Liquid Solenoid Valve

Technicial Detail

●Part Number:DF-125F ●Coil Type: IP65 DIN Connector 
●Mode of Operation:Normally Closed ●Voltage:AC220V,AC110V,DC24V,DC12V
●Pipe Size:DN125 Flange ●Response Time: Less than 1 second
●Body Material:Cast Iron ●Duty Cycle: 100% but not indefinitely
●Coil Material:Copper ●Suitable Media: Water, Air, Oil, Gas
●Seal Material: NBR or VITON ●Weight:45.7kg
●Orifice:125mm ●Length:400mm
●Temperature Range:-5-150°C ●Width:210mm
●Pressure Range: 0.3-12Bar ●Height:380mm

DF Cast Iron Liquid Solenoid ValveDF-125F Cast Iron Flange Solenoid Valve works great with water, air and fluid. Operates normally closed and has a solid cast iron body. This valve is big flow and works very well with a variety of applications. Irrigation, Fountains, Water Filtration, Solar Heating, Aquariums, Automotive, Beer Brewing, Hydroponics, HVAC, and Plumbing and everywhere else one of our valves can be applied

It's two way two position pilot operated diaphragm electric water solenoid valve uses NBR or VITON diaphragm material that is compatible with many liquid such as water up to 150°C. The valve is normally closed, closed when de-energized and open when energized. It is capable of operating at 0.3 bar differential pressure. This solenoid valve can fit with international flange DN125. 

DF-125F Cast Iron Flange Solenoid Valve has four coil with voltage AC220V, AV110V, DC24V and DC12V. The coil head is fitted with a DIN connection that can easily be connected with your own choice of terminals. This model is mountable in any position and features a conveniently positioned arrow on the body to indicate the direction of flow. Its response time is very low; in fact, it acts in less than one second, making it a great choice for all types of applications.

Non-applicable fluid
When the temperature is high, it is liquid, and solid when cooled; Corrsive Fluid; Fluid above 20 cst concentration.
The impurities in the line must be cleaned first before installation. In order to prolong service life, Y filter should be installed on the front end of solenoid valve.



Solenoid Valve Size Chart(mm)
Valve NO. DN   CV   A B C N-φF Weight(kg)
DF-40F 40 30  155    110    205  4-φ18 6.5
DF-50F 50 48 200 125 200 4-φ18


DF-65F 65 52 259 145 277 4-φ18 9.5
DF-80F 80 82 278 160 289 8-φ18 18.1
DF-100F 100 125 350 180 316 8-φ18 25.4
DF-125F 125 222 400 210 380 8-φ18 45.7
DF-150F 150 292 450 240 405 8-φ22 55.2
DF-200F 200 513 560 340 516 12-φ22 112




  • * (All * must be filled in)

Related Products