1 inch Brass Solenoid Valve
2W250-25 1 Inch Brass Solenoid Valve
Technicial Detail
| ●Part Number:2W250-25 | ●Coil Type: Plastic DIN Connector IP65 |
| ●Mode of Operation:Normally Closed | ●Voltage:AC220V,AC110V,DC24V,DC12V |
| ●Pipe Size: 1" G or NPT | ●Response Time: Less than 1 second |
| ●Body Material:Brass | ●Duty Cycle: 100% but not indefinitely |
| ●Coil Material:Copper | ●Suitable Media: Water, Air, Oil, Gas |
| ●Seal Material: NBR or VITON | ●Weight:0.97kg |
| ●Orifice:25mm | ●Length:90mm |
| ●Temperature Range:-5-150°C | ●Width:72mm |
| ●Pressure Range: 0-10Bar | ●Height:118mm |
Description
2W250-25 1" Brass Solenoid Valve works great with water, air, gas, fluid and vacuum. Operates normally closed and has a solid brass body. This valve is compact in size and works very well with a variety of applications. Irrigation, Fountains, Water Filtration, Solar Heating, Aquariums, Automotive, Beer Brewing, Hydroponics, HVAC, and Plumbing and everywhere else one of our valves can be applied
It's two way two position semi direct acting diaphragm electric solenoid valve uses NBR or VITON diaphragm material that is compatible with many liquid such as water up to 150°C. The valve is normally closed, closed when de-energized and open when energized. It is capable of operating at zero differential pressure. This compact solenoid features with female BSP 1" thread or NPT 1" thread.
2W250-25 1" Brass Solenoid Valve has four coil with voltage AC220V, AV110V, DC24V and DC12V. The coil head is fitted with a DIN connection that can easily be connected with your own choice of terminals. This model is mountable in any position and features a conveniently positioned arrow on the body to indicate the direction of flow. Its response time is very low; in fact, it acts in less than one second, making it a great choice for all types of applications.
Non-applicable fluid
When the temperature is high, it is liquid, and solid when cooled; Corrsive Fluid; Fluid above 20 cst concentration.
Attention
The impurities in the line must be cleaned first before installation. In order to prolong service life, Y filter should be installed on the front end of solenoid valve.
| Solenoid Valve Size Chart(mm) | |||||||
| Valve NO. | Orifice | CV | A | B | C | Thread | Weight(kg) |
| 2W160-10 | 10 | 4.8 | 63 | 56 | 106 | 3/8" | 0.63 |
| 2W160-15 | 15 | 4.8 | 63 | 56 | 106 | 1/2" |
0.62 |
| 2W200-20 | 20 | 7.6 | 66 | 56 | 110 | 3/4" | 0.66 |
| 2W250-25 | 25 | 12 | 90 | 72 | 118 | 1" | 0.97 |
| 2W350-35 | 35 | 24 | 109 | 88 | 155 | 1 1/4" | 1.97 |
| 2W400-40 | 40 | 29 | 115 | 95 | 162 | 1 1/2" | 2.12 |
| 2W500-50 | 50 | 48 | 155 | 110 | 195 | 2" | 2.94 |
- Previous Product:1.25 Inch Brass Solenoid Valve
- Next Product:3/4 Brass Solenoid Valve
